Home SE-5 1000 Operating Principles







The SE-5 1000 INTRINSIC DATA FIELD ANALYZER is based on the premise that everything which exists emits and absorbs energy at specific vibrations.  Vibrations or rates of oscillation appear to be the common denominator which describes the various states of energy from matter to thoughts.  Rates of vibration can reveal what is occurring in any energy field.  Vibrational energies can be measured and appear to be altered by instruments designed to neutralize abnormal or enhance normal vibrational patterns.


The SE-5 1000 INTRINSIC DATA FIELD ANALYZER operating mechanism can be explained in terms of known laws of physics.


1.         Everything that exists is fundamentally an energy field which contains vibrational information about the contents of that field.  All fields involve IDFs.


2.         The interchange of matter and energy in a subtle information field can be measured in terms of wave form and amplitude.


3.         The content of a wave field is based on its amplitude, wavelength and energy.


4.         Every substance has a resonance which will provide increased energy proportional to its being stimulated at its resonant energy or conversely less energy if stimulated with energy opposite its resonant vibration.



The SE-5 1000 INTRINSIC DATA FIELD ANALYZER electronic mechanisms operate through a unique integrated circuit chip system which converts word and numerical commands into subtle informational fields.  The instrument analyzes input signals from a given sample and compares them against baseline standards to determine the amplitude strength of desirable or undesirable vibrations. From this analysis an output broadcast signal is selected which may either neutralize, strengthen or balance subtle energies. This process is accomplished through a series of steps:


1.       Subtle radiation containing energy information from a sample is input to the translator circuit of the SE-5 1000.


2.       Information is entered into the computer.


3.      Numerical or word commands are converted by the computer into a binary code called ASCII (standard language of computers.)


4.       The ASCII code is sent to the SE-5 1000 translator circuits.


5.       ANALYSIS:  The collective information from the input sample (step 1) and the entered instructions from the computer (step 2) are then modulated at a specific amplitude wave form into one signal for analysis. 


6.       A resonating signal pulsed at 7.1304 Hertz is sent to a high gain amplifier designed especially to amplify IDF signals that researchers report are supportive to the overall energy field of the sample being analyzed.


7.       BALANCING:  The resonating signal is driven into antenna coils that output IDFs when the SE-5 1000 is in the balance output mode.  The process is reported to employ gravitational-like energies to return the energy signal to the sample.


8.       The output signal modulation appears to initiate a reduction in the difference between input and output.  The modulation continues until the instrument indicates an equilibrium between the actual measure and the operators desired measure.  The process is similar to that of a tuning fork or turning a thermostat to the appropriate setting.


NOTE:         The SE-5 1000, although containing electronic circuitry and components, does not function according to known electronic or electromagnetic mechanisms.  Rather than cycles per second or Hertz resonance the SE-5 1000 operates with geometric resonance or pattern amplification. Information entered into the   SE-5 1000 computer serves to tune into patterns of energy similar to morphogenic fields existing as a blueprint in the prephysical state prior to manifestation of physical phenomena.



Manufacturers of IDF instruments are not allowed to make claims.  The SE-5 1000 INTRINSIC DATA FIELD ANALYZER is an experimental device to be used for research purposes only.  No claims are made for the diagnosis or treatment of disease.  It is the responsibility of each researcher to make their own conclusion.



IDF research, as with any discipline is based on certain tenets, principles, postulates and assumptions.  Some of the more important ones are noted below and serve as a conceptual aid in conducting your research experiments.


     The law of life is motion, a rhythmic cyclic pulsation of energy which tends to preserve and restore balance and harmony.  Subtle information is innate intelligence.


      All objects have natural frequencies of vibration.


      Disorders are altered functions and the natural response to strain and stress or imbalance.  Altered function is nothing more than a change in vibration caused by the source of stress -- whether chemical, mechanical, germ, etc.  Sources of stress such as germs also have characteristic vibrations of their own.


     The application of the right energies may neutralize stressors and change altered function because all objects have the tendency to return to their original patterns if given the opportunity.


      Objects can either absorb or reflect energy vibrations according to the need.


      Changes in vibration of one part of the field can effect changes in the entire biofield as the whole and the parts are inter-related.


     As all parts of a biofield are interrelated, researchers report that it is important to:  neutralize all negative or interfering energies (stressors) in the system; balance or re‑ establish the normal vibrations of the whole; in addition to the specific problem or imbalance.  Stressors become a problem only when the biofields natural balance is disturbed.


     The greater the harmony between the universal mind and the individual mind, the more rapidly the biofield or specific conditions can be normalized.  Mind and matter are inter‑ related.  A change in one results in a change in the other. Attitude is most important as energy follows thought.  Thought is affected by the energy contained in matter.  Frequency is thought in action.


      Being able to measure the presence of a particular energy rate or signal allows one to observe changes in that signal resulting from application of balancing energy, be it from allopathic, homeopathic, radionic, laying-on-of-hands or other sources of therapy.

      Researchers report being able to differentiate between signals from normal or healthy tissue and from diseased or potentially abnormal tissue.  Obviously, when measuring human signals, the healthy energy rates would be present to a normal degree, while the abnormal signals would be absent or read very low.


      Where abnormal signals are present, the healthy signals are generally weak.  It is reported that when abnormal signals are corrected, the healthy signals return to a normal level. Conversely, when healthy body signals return to normal levels, most abnormal signals tend to decrease.


     The imbalanced or disease-like signals appear to be reduced by application of proper balancing energy.  The research charts and rate book numbers for conditions show instrument settings to signal-process the energy from the subtle bodies to provide experimental balancing energy.


     Tunings are also available for healthy signals to allow experiments to either boost or balance their amplitudes where the presence of imbalanced signals or pathogens appear to have reduced the normal readings.


     Researchers claim to be able to detect the presence of abnormal radiations in the subtle body signals using instruments, and to measure the intensity of such imbalances. The amplitudes of healthy body signals are claimed to be sensed in a similar manner.


     Where imbalanced energy is present, researchers have reported correcting such imbalance by application of the listed energy numbers for the conditions or organs and tissue involved. Analysis after such subtle body balancing has shown the correction of the energy imbalance to have taken place.


     Our intent and concentration of our attention on the research question and balancing rate is of primary consideration in IDF experiments.  The SE-5 1000 detects and amplifies our thoughts or intent.  The instrument helps, to focus, to collect and hold conscious, unconscious and superconscious energies.  Because energy follows thought, as you think so shall it come to pass.  We just have to be in alignment with the purpose of our efforts.


     The more knowledge we have of a particular subject matter the more clarity in our intent.


Last Updated (Wednesday, 24 June 2009 06:37)